This unit of competency specifies the outcomes required to remove non-friable asbestos containing material (ACM).
It includes preparing, containing and removing non-friable ACM, and knowledge of decontamination and disposal requirements.
The WHS regulations and the Code of Practice: How to safely remove asbestos (2018) requires workers to hold certification for the class of licensed asbestos removal work they will be undertaking. Completion of this unit of competency is certification to undertake non-friable (Class B) removal work.
Occupational licenses are required nationally. This unit is required for all ACM removal workers engaged in the removal of more than ten square metres of non-friable ACM.
A class B asbestos removal licence only covers work for the removal of:
The licence does not authorise the removal of friable asbestos (class A asbestos removal work).
PRE-REQUISITE:
Learners must hold CPCCWHS1001 Prepare to work safely in the construction industry (White Card) competency to be able to do this course. Participants must be able to supply a copy of a Statement of Attainment for CPCCWHS1001. We cannot accept the white card as the evidence of completing the pre-requisite unit.
Non-friable asbestos is bonded asbestos where there is no loose fibres that can become airborne.
It is usually found in cement sheeting, often called fibro, used in many Queensland buildings before 1990.
The sheeting was used for cladding, roofs and fences and can often be found as backing boards in wet areas like kitchens and bathrooms.
Where class B asbestos removal work is being carried out by more than one person, the licence holder must ensure a supervisor is readily available to the workers carrying out the asbestos removal work.
The course covers:
CSQ funding is available to eligible participants.
97 Rooney St, South Townsville QLD 4817
admin@aittraining.com.au
07 4755 4222
